battery operated inflatable air diaphragm 12v high pressure oilless
pump
12v high pressure oilless pump's parameter and features
1. DC motor with long lifetime
2. Low noise
3. Continuous operation: The pump can sustain heavy duty work for a
day;
4. Compact design, It has good waterproof;
5. Low power consumption, high efficient-save on operating cost;
6. Small and Light-weight, Installation is very simple;
7. Wide application;
8. Perfect for indoor or outdoor use;
9. It can be customized according to customer's technical
requirements.
Model | DX312-6504-6000 |
Size(mm) | 30*51*77.4 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 8 |
Free Flow(L/M) | 5 |
Pressure(Kpa) | 250 |
Vacuum(Kpa) | -65 |
Weight | 180 |
Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
The medium temperature of 12v high pressure oilless pump
According to the temperature of the medium which pass through the
pump, choose the ordinary type or the high temperature type.
Electromagnetic interference of 12v high pressure oilless pump
If there is a precision circuit control in micro pump, depending on
the circuit anti-interference ability, may need to order low
electromagnetic interference micro pump. Now, with the wide
application of micro vacuum pump in various fields and the
improvement of vacuum technology, the performance of micro vacuum
pump is improving, and some fields can replace large vacuum pump.
environmental testing requirements about 12v high pressure oilless pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately
placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After
50 cycles was returned to room temperature.0.5h later,pumping power
test is conducted. The pump should be able to work properly;
fasteners should not loose , in working condition pump’s body
should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical
performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After
0.5hours later, at room temperature power pump. Fastening points
should be no loose. The pump can work normally. Its performance and
parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power
the pump and test it.( when testing the pump,pump’s body can not
have ice ). Fastening points should be no loose. The pump can work
normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started |
Electrical Performance about 12v high pressure oilless pump
| Number | Item | requirements |
| 1 | Insulation resistance
| 10MΩ / between wire and frame measurements , 500VDC / min
|
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min |
Special requirements for materials about 12v high pressure oilless pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
More details about 12v high pressure oilless pump
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 2.5 L/min and 7L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
12v high pressure oilless pump's photo
Working principle: the rotary motion of the motor turn into the
swing of connecting rod which makes the diaphragm up and down
motion. In the process of the downward movement of the diaphragm,
pump cavity will suck medium through the inlet valve; Upward
movement of the diaphragm, pump cavity press out media through the
outlet valve. Mechanical transmission parts and pump cavity is
isolated by diaphragm. Diaphragm pump does not need oil for
auxiliary lubricating, in the process of transmission, extraction
and compression of medium.
12v high pressure oilless pump's application
The pump can be used in wide range.
1. Electronic products,agriculture,finishing,light industry
products
2. Analytic-al instruments
3. Chemical and production engineering
4. Various ancillary equipment
12v high pressure oilless pump's dimension
Pump Size:30*51*77.4mm
Pump Weight:180g;
Outlet:OD 5mm, silicone hose suggestion:ID 3.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
12v high pressure oilless pump's packing and shipping
Packaging:
CTN/PCS: 75PCS
G.W. : 15 KG
DIMENSION : 47 * 31 * 25 CM
1.The stock samples can be sent to you within 3-5 days by
international express after received
2.The batch order can be shipped to you in about 30-40days after
order confirmation (by air or by
sea)
Founded in 1999,yanhua Micro pump Technology company is the leading
and biggest manufacturer specializing in various DC micro pump and
fluid comprehensive solution in China.
Our sale engineers team have more than 15years overseas experience
in customer service,especially like OEM and ODM, and successful
service for several fortunes 1000companies, can provide immediate
and rapid solution and satisfactory answer to the clients.
Over 15 years’ experience in overseas customer service without
complaint.
Engineers’ on-site service and quick solutions.Professional sales
engineer to provide free technical support and solve problems with
24hours.
We have obtained the ISO9001 certification, and our products comply
with the EU RoHS Directive and REACH regulations, FDA
certification. Some of our products have WARS, NSF approval.
Today, Yanhua have 12 production lines and 300 skilled workers, our
monthly producton capacity is 500,000pcs brushless and brush dc
pumps,100,000 piston pumps and 10,000 gear pump and water pump.
Certifications
We have obtained the ISO9001 certification, and our products comply
with the EU RoHS Directive and REACH regulations, FDA
certification. Some of our products have WARS, NSF approval.
Today, Yanhua have 12 production lines and 300 skilled workers, our
monthly production capacity is 500,000pcs brushless and brush dc
pumps,100,000 piston pumps and 10,000 gear pump and water pump.
RFQ
Q1: Are you a factory or trading company?
A1: We are a factory.
Q2: Can I get a sample? How long it will take to get a sample?
A2: Yes, you can order sample to test and check the quality.
For our usual sample, the sample lead time is about 3-5days.
If special sample, it will take a longer time for design and order
materials to do pumps.
All our samples are done by our engineers.
They can according to your needs customize pump for you.
Q3: How can I make the payment?
A3: Payment can be made through T/T, paypal or Western Union.
Q4: Is it OK to print our logo on Pump?
A4: Yes, we could do OEM and print your logo on Pump product.
Q5: What about the package ?
A5: Standard export carton.
Q6.: The use of products have?
A6: The pump can pump various strong acid, alkali and corrosive air
etc.
Q7: How product quality and service?
A7: Our pump have CE certificate, quality assured and provide
various personalized needs.
Q8: How to proceed an order for Mini Air Pump?
A8: (1) Checking /confirming all details information( include
requirement of pump product, payment terms, price,quantity, leading
time or others);
(2) Checking/confirming the sample's quality or satisfied result;
(3) Final checking/confirming the price/quantity/leading
time/payment terms for first trial order;
(4) We factory arrange the production after receiving the real pump
order.
